Clevis Pipe Hangers & Clamps

To install a clevis hanger, first secure a threaded hanger rod to the overhead structure using an appropriate anchor. Then wrap the clevis strap around the pipe or duct, insert the bolt or pin through the clevis ears, and fasten securely. Ensure the rod is plumb and the hanger is rated for the load before final tightening.

Clevis hangers are available in a wide range of sizes to accommodate pipe and duct diameters from as small as 1/2 inch up to 12 inches or larger. Size selection depends on the outer diameter of the pipe or duct being supported. Always verify load ratings and dimensions against your project specifications before ordering.

Clevis pipe hangers are commonly manufactured from carbon steel, electro-galvanized steel, or stainless steel. The material choice depends on the environment — galvanized or stainless steel is recommended for corrosive or high-humidity settings such as industrial ventilation and dust collection systems.

Load capacity varies by hanger size, material, and rod diameter. Standard clevis hangers can support anywhere from a few hundred pounds to several thousand pounds depending on configuration. Always consult the manufacturer's load tables and ensure the hanger rod, anchor, and structure are rated for the full system load.

Yes, clevis hangers and clamps are widely used in HVAC ductwork support systems. They provide secure suspension for rectangular and round ducts in commercial and industrial buildings, meeting common ventilation installation requirements. They are compatible with standard threaded hanger rods and overhead structural anchors used in typical HVAC construction.

Absolutely. Clevis hangers are a standard component in dust collection system installations, providing robust overhead support for ductwork runs from collection points to filtration equipment. Their adjustable design accommodates various duct sizes and layouts commonly encountered in industrial dust collection and exhaust ventilation setups.